Search results

no, it was sold

You can drill the heads off the bolts. The switch will then slide off. Remove what's left of the bolts with a vise grip(they'll be two long studs left). For re-installation, you can either use SS allen head bolts with locktite or buy the original Yamaha bolts that will shear off when it reaches...

yes, I can do it

yes, I still have it

this is not the 'top end' shock STG advertised. the picture on the site is not correct. The S46er1 shock they are selling is the cheapest Ohlins street shock for fz6 as on the picture, so I guess it's the same one you see for $518 somewhere else.

the MPH switches to KM/H if you press and hold both buttons for a couple of seconds, so it's not a problem. I guess the RPM difference might be a bigger issue to have them shown correctly. I didn't realize that all models despite they look the same have different limits. have just checked my...

yes, you are right. I didn't notice that. the red line is slightly different, but not much 11.5 vs 12

several yamaha models share the same gauge: fz1, fz6, fz6r & fz8. these gauges cost used about $250 on ebay and there are plenty of them for sale

you should find a machine shop with a manual lathe and ask them to produce 2 wheel spacers. it is not too complicated and many shops can make them. I've found one in PA on the craigslist over a year ago, but unfortunately can't share now because that old link doesn't work anymore. btw, I paid...

Hi guys, I have a modified fully adjustable 2003 R1 rear shock for FZ6 for sale if anyone is interested. This is an unfinished project. It was half way done when I found a penske shock for FZ6 and lost interest in this one. You can install it on your bike and ride it as is, but it MUST(!!!) be...

https://www.colorrite.com/index.cfm input your year/model there and see the codes

watch this video. it is in Russian, but the guy shows step by step what he does so you will get the idea what goes where. european naked version has two more treaded holes on the bottom of the triple tree clamp. you will need to drill and tread them to screw on the upper side of the mounting...

https://www.leovince.com/en-us/product/1811-3078-lv-one-stainless-steel-yamaha-fz6-fazer-s2-abs-2007-2011 LeoVince still produce some FZ6 pipes. I do not know if there is a difference between ABS/non ABS versions. I guess not, but you can contact them and ask. They have for 04-06 years too.

https://www.shadusa.com/products/shy0f7000 I am using this one. I like it. It is wider and more comfortable than stock. Costs less compared to Corbin and looks better on the bike too imho :)

https://www.sportbikes.net/threads/r6-fork-mod-instructions-revived.274466/ http://www.lerecords.com/fz6/r6forkmod.htm here are links with detailed instructions how to do the swap, if you decide to go that way. this is what I used as a reference. enjoy :)

to swap to r6s fork you will need besides fork tubes, 4 spacers for brake calipers (I believe 06 fz6 has the same size calipers as 07 and 07 calipers fit the r6s forks, but I can be mistaken), 2 special adapters for a wheel and r6s front wheel axle. just keep in mind that fz6 front fender will...

I have found a seller on ebay who made these (https://www.ebay.com/itm/202665980124) , but they all are sold out at the moment. I contacted him. He says a demand is low lately, but he can make a few new sets if he has time. Let me know if you're still looking, I guess we can convince him to make...

Hey! I am looking for the same. Any progress?

my baby :)

Looks like I need to cut it anyway. Ended up bringing it unremoved to the powder coating shop. The owner said they will remove it for a few extra bucks. Problem solved Thank you!