Search results

Tried that, also bridged those 2 at the loom lol

Another question............ Still stalls If its in gear and I pull the clutch lever it should crank - yes? I ask because it doesn't, I've bridged the switch on the loom side and it still won't crank, I'm guessing the 2 issues are unrelated but god knows at this rate 😂

All appear flat and level

Yeah nice and smooth.

I got this, it's fresh, also had a look at the clutch basket, pics attached, signs of wear, not sure if that's normal 🫣

Well here's some measurements Steels 1 @ 2.2mm 7 @ 2mm Friction Plates All 8 3-3.1mm Springs All 6 54mm So all well within spec 🙄

So bought new verniers 🙄 When measuring the friction plates, do you measure the parts that stick out (I call them ears lol) or do you measure the pads in the plate?

UPDATE.............. Sort off 😂 So I reassembled it all again for the 439th time, again I can see the pressure plate move and the wheel wont turn.......... However, if I keep the clutch lever pulled after a few seconds I can turn the wheel but it's got a decent amount of drag on it, I can turn...

Yeah the 2 dark brown friction place go to the outsides and the bigger steel goes in the basket 1st

8 steel plates and 8 friction, can't find my verniers bit ill measure when I find them

With the plates removed Number 3 does turn freely in neutral, when in gear it turns the rear wheel

Looks exactly like that, I've only had the friction and stainless plates out but yeah, it looks like that

No, he means BRAKE! If the clutch is fine and the lever is pressed there should only be a slight drag from the brakes and nothing from the clutch!

I built this bike! I bought the frame, I bought the subframe, I bought the engine, the loom, the lights, forks wheels, I bought parts and made a bike. Pressure plate move 3-4mm and still doesn't disengage

How many mm does the pressure plate need to move to disengage the clutch, I can see it moving 3-4mm but the clutch is still engaged. I've adjusted the handlebar lever and the pivot but it just won't disengage! I'm now wondering if the cable has stretched? For more information I have the...

That's the thing, like a damn fool I didn't mark it's position before I removed it 🙄

So my bike stalls when you put it in gear, it jumps forward like the clutch isn't fly engaged, I've tried to adjust the handlebar lever but it makes no difference, also tried pushing the lever on the engine in and it's still the same, now as I've never ride the bike I don't know it's the clutch...

She's Alive, SHE'S ALIVE! Now before I say what was the issue, I'll say I've been working on cars for over 20 years and I just wanted to buy parts for a bike to see if I could build it and get it running, so what was it stopping it from starting? Well I hadn't connected the clutch switch or...

OK sooo, the fuel pump wire, when I turn on the ignition I get 12v, after a couple of seconds I can hear the relay click and the voltage goes to 0 The coils I get 12v with the ignition on I've attached a couple of photos to make sure I'm checking the correct wires

OK update, so I've bought a new barrel/transponder and ecu so no more emulator and a key that matches. Immobiliser light blinks every couple of seconds with the ignition off and doesn't blink when the ignition is on - so that's good lol The hazards on the clocks now flash when the ignition is...