Search results

I'm sure the stock muffler(under tail)on my bike is very restrictive,but I do like the location & quiet. Do you know if there exists a good quality slip-on with quiet,removeable/repackable baffles that will give me more flow/power up past 7K rpm ? I want a bigger 'Kick' up-top.

I'm getting ready to replace my original 08' OEM clutch cable and I know that will help,but read somewhere that I can install a different small clutch actuation lever down on the engine,which will give me an easier time of working the bike through the gears. Do I look for one from a different...

I noticed Grahammarsden in the UK's FZ6 and his header is shining pretty silver ! My front 4-pipe header needs cleaned-up(never been cleaned by the PO,but always garaged)and I want the best chrome cleaner & polish I can get;what do you recommend ?

My 08' FZ6 has 17,750 miles on it now(purchased it with 14,500 a yr. ago)and it was always garaged by the PO;I see no nicks or damage to the tubes. I have HyperPro springs and their oil to install. I want to order OEM seals/wipers,etc. and open these up,flush them all out and install the seals...

I'm still running the original clutch cable for my 08' FZ6,but it's starting to drag a bit after 18 yrs. I will be replacing it with my new OEM Yamaha cable. Has anyone lubed their cable yet? The inner cable is coated with a protective sleeve and I don't want to damage it by using the incorrect...

I've been looking for an OEM Yamaha 'comfort seat' recently. I found this one,just arrived,and want your opinion on if it's a factory Yamaha 'comfort seat'. I got it from the UK.

I want to find a special small,aftermarket,powerful auxiliary Driving Light/s to mount somewhere underneath? my fairing to point a powerful beam of light far ahead onto the road surface:independent of the the stock headlight case.

I have the standard,factory helmet lock on the left side of the bike and I'm having a struggle to figure out how to actually lock my Shoei Neotec II to the stock helmet lock;I want to take my Neotec out of my closet & off my shelf,and finally ride my FZ6 with it. I don't want to always carry the...

I'm looking for a small pair of lower case guards,just to protect the lower cases. I want the ones that don't obscure the oil filter or oil drain plug.

I'm considering installing,as one choice,a D.i.D. 530VX3 drive chain because others said it's a good one,although it's a good bit wider than my stock OEM 50V4 DiD chain.. The link pins/chain width of the D.i.D. 530VX3 measures 25.3mm 🤔 My stock Yamaha DiD 50V4 chain measures 24mm pin width. I...

I just received my NOS owners manual the other day;it mentions low octane in the fuel,so I filled-up with a tank of 87. I notice a bit of pinging at low throttle/very gentle acceleration times and less power all-through now. :( The gasoline out here in CA. does have more Ethanol & other...

I just bought an 08' FZ6 S2 and want to go to the grocery store,etc. I want a strong top rack(w/ a top case)which I can opt to install a platform to carry items later-on,when needed;and I want the side-racks to hold large luggage hard cases. A set of Givi monokeys would be great. I have luggage...

The shock was on 3 when I first got the bike;I put it down to 1 and it's still very hard. :( Seems like too much compression damping? I was speaking with a Yamaha guy from Partzilla the other day and he recommended an 05' R6 rear shock,the one with the red spring;he described how it has...

I want to sit-up a little more,but still tuck at speed;I'm 6'1". I like the standard height bars. I want to get a windscreen for my FZ6 S2 that allows less turbulent wind to flow around me;to cleanly slice through the wind blast,rather than mounting a flat as a board type screen which can create...

I have a 2008 FZ6 and don't like how flexible the rubber mount bushings are on the footpeg brackets. I don't mind some vibration;I Do want to step-down-hard on the footpegs without having the rubber bushings flex;it sucks. Do you know how I can get the footpeg brackets to mount Solidly to the...

I'm looking to purchase a used OEM Yamaha factory service manual for the 08' FZ6 S2. I've looked on Ebay,but they aren't much helpful with a physical description and part# LIT........ Can anyone help me know what's the correct one ?

I haven't purchased an 05' FZ6 just yet,but close. :) I want to get a 49 State model 05' and think I may have located one. Can any of you tell me if the 05' has a CAT,MAS,and an Oxygen sensor? if it doesn't have an O2 sensor or a MAS,then how does the computer sense & adjust the mixture for...

I'm looking for an FZ6 in very good condition;one that's been adult owned and operated(not pounded,layed-down,etc.)And maintained;I want to find a good,used bike that's been lovingly cared for. I would love to buy a blue color bike:that dark blue 🥰 if possible, or silver as a 2nd choice. Can...