Search results

You get used to the cut off light output when cornering :) And if you really want to hit the twisties at night, just flip to high beam :BLAA: Grtz, Degake

^^^+1 Grtz, Degake

That really sucks Martin :( The Belgian roads really are in a terrible state :mad: Now you dropped your bike, why don't you go naked? ;) Grtz, Degake

If you only need the base of the indicators (to mount the threaded shaft of the LED indicators to the big OEM hole), why don't you just get the adapter plates thatgoin there?? (just guessing that it's what you are trying to do :) don't shoot me :D) Grtz, Degake Sent from my New iPad using...

Indeed, it's a halogen projector. But it will work very good with a rebased H3 HID bulb as well :thumbup: The only downside could be that it is low beam only, but for certain applications/retrofits it will be a very usable item :). The wiring is indeed straight forward, but mounting and...

Looking soooo good :drool: I can't wait to see the finished project :thumbup: (and the howto's :D:Flash:) Grtz, Degake

Here are the manuals: Owner manual Service manual Everything you need to know is in there :) Grtz, Degake

So you have a problem with 25 year old men? :mad: :spank: We're not all alike :rolleyes: :BLAA: Grtz, Degake

All our family's hopes and prayers go out to Brenda and John... Let's hope for the best, that they needed to evacuate because of the smoke contamination and not due to direct fire hazzard.... Grtz, Degake Sent from my New iPad using Tapatalk HD

The version with the metallic tip is the old version, which has been replaced with the newer version, with thermoplastic end cap. If you search around, you could/should find some of the older version in clearance :) The difference between the 05/06 (S1) and 07+ (S2) versions is the CAT...

Same with the Leo LV's. Everything fits fine. (They give you a replacement part for the rear fender "hanger" to keep the stock one mounted) They also run much cooler than the stock exhaust... Grtz, Degake

You can mount the Leo's without the CAT eliminator if you want to keep the CAT.... :) (The eliminator tube just replaces the CAT mid-pipe, it isn't a different dimension or shape) Grtz, Degake

The sexiest aftermarket exhaust for the FZ6 I've ever found, was the Termignoni... Such a nice look and sound :drool: But at €1200+, it's a bit too expensive :eek: Grtz, Degake

Total cost of a complete retrofit package, right from theretrofitsource.com will cost you $150.... In the end, it's up to you to decide :) (But, if you buy the normal HID first and upgrade to projectors afterwards, it will cost you more than directly buying the projector package :Flip:)...

Yes, it is real tight... So tight I had to move my headlight assembly forward to get my D2S bulb + connector mounted.... :spank: Grtz, Degake

You could also use tailpipe sealer or tailpipe putty. These are even cheaper solutions than the rtv silicone Stumbles posted... :) Grtz, Degake

I have the Leovince LV One (stainless steel).... Why? Because I find them the best looking, and they sound awesome :D (especially without dB-killers :drool:) Grtz, Degake p.s. A thread like this will only give you personal opinions.... There isn't one type of aftermarket...

There is no direct access to the bulb on a naked FZ :) So we have to remove the headlight to replace bulbs, or to fit HID :eek: Grtz, Degake Sent from my New iPad using Tapatalk HD

That's cheap enough :thumbup: Grtz, Degake

Thx for the rep! :thumbup: