Search results

Sold!!!!

Pookamatic: I am in Del. City. Forum: Passed inspection! New LED's are on order. Can't wait to get rid of these hideous lights.:Flip: ( at least for another 2 years until inspection again)

SawBlade: DE requires 3.5" diameter to pass. These are the biggest guadiest things i could find that would fit the 2 Bros Fe kit. Good news is I passed inspection today, so they are coming off and new LED's are going on in the next couple days!

DaveTX: I use the ones that came with the 2 Bros exhaust. However I will be switching to LED's front and rear with Magic Blinker relays after inspection time.

Its inspection time for the FZ. Because of my 2 Bros exhaust and FE kit, I am unable to put the factory signals back on because they don't fit the bracket nor will the ones that come with the exhaust pass inspection. So after an exhausting search on ebay I found these off a CB250. They fit...

I am looking for a reputable upholstery shop to get the stock seat shaved with a gel pad installed for my wife's FZ. I live in Delaware, but someone trust worthy in the tri-state area is fine. I am having no luck finding a shop around here and local shops and dealers are un willing to make...

Manufacturers do a great job, but there is always room for improvement!

Quick question. On the website it states not to use those lights as running lights. I see that yours are on as running lights. Any problems thus far? Did you use a "wire-in" adaptor to convert the single element to a running light?

Thanks all for the advice. The chain shows the same spec in multiple points on the center stand so I am going to leave it.

Was doing some spring maint. on the bike: changing the oil, lubing the chain, etc. I decided to check the tension on the chain. The bike only has 3,100mi. It seems loose to me, but I cannot pull it back off the sprocket and it is within the factory specs for tension. However the chain can...

thanks all for your contributions. pegs are coming off when I get my seat cowl

Considering going to a rear seat cowl as I ride alone. Anyone remove their passenger pegs to "clean" up the rear? Any pics? Search function turned up ditto.

PM sent regarding windscreen

A better pic of the mirrors from the front Visibility is good of the lanes next to you ( no shoulder shots )

Best pic I have of the mirrors, but you can see how they don't stick up high like OEM

I've got a '08 Fz and after the wife dropped it in the front yard (stupid story) I found myself in need of mirrors....Long story short, a set of replacement '06 R6 mirrors were the ticket at $20 each. They sit lower and wider on the fairing so it doesn't look like antennae on a bug anymore...

I am totally stoked about my mods so far and I can't wait to ad these tasty parts: 15T sprocket w/ speedo healer Full Fairing kit from Yamaha/Canada Flush mounts in front Hyper Pro lowering springs :rockon:

We put some pipes on my buddy's 1300 Honda last Feb. We finished around 10pm and we all went out for a victory ride down to the local watering hole. It was 27*F when we left and 22*F when we left the bar. I had on Carhartt coveralls and my hunting gloves....but it was still a bit chilly at 65mph.

26...First bike was a '92 Nighthawk 750. Got my '07 FZ just to be a little different, plus its alot more comfortable on long rides. Pretty stoked about future mods ( -1/+2 sproket change, hyperpro lowering springs, yamaha full fairing kit)

Did a search on this but not a lot of specifics......I see a lot of you guys are running a -1 front sprocket...but what brand are you guys running? Can only find a few and I am unfamiliar with their brand names. Don't wanna buy junk that's gonna fall apart. I've got a 2007.