Search results

What is the best type of wax to use on a bike.

I'm just wondering if the Mr.Clean no drying car wash kit any good? I like spending more time riding my bike then washing it so wondering if this will help.

don't worry about it. the mod is easy to do if you do it the way i did no need to remove the tank or battery box just the inside of your 1/4 fairing (6 screws). besides the worst thing you can do is fry a fuse or a light bulb. just remember to keep the bike off until your complete done.

when using the wiring harness from biker dude allow your right low beam light to turn off when you turn on your high beam. i have read a lot of the headlight mods on here and was wondering what turns the low beam off. a switch? or a relay that is already inside the bike?

I done the mod but I put in a automotive relay to prevent the high beam and low beam filaments being on at the same time in the right light. here is a wiring diagram of what i done. if you have any questions about it wright me.

no clear coat but I've had it done now for 2 years and it has held up good. even with 4 rear tire changes and 1 front. but if you are going to paint anything just remember to ruff up what you are going to paint with a 500-800 grit sand paper to make sure the paint sticks.

here are some pics of my mods.

I have done a couple of mods to my 2006 FZ6 for the budget moder. I really saved some big bucks by making my own fender eliminator out of a 1"x1" piece of 90 degree angle aluminum. i just cut in the corner about 1" and beat the two tabs square on a piece of wood then drilled holes on each side...

Good idea for a mod it would be cool to have 2 lb and 2 hb lights. but you might want to consider putting in a automotive light relay so you don't have both filaments on at the same time in one bulb when you switch on your hb lights. this is what i did for the dual lb mod. you could easily...