Search results

ok so found thread on diagnositic mode and did it all it said was diag pushed select and nothing comes up I am guessing that means no codes.

OK got a cpl questions for the fazer guys. First my bike is an 06 I am the second owner pretty sure it is bone stock. Can I put this bike into diagnostic mode being 04-06 model? Second I am wanting to sync my throttle bodies which cylinder do I use as a base when I hook up the manometer? If per...

Houston I believe we may have an issue, so cpl weeks ago I bought (1) head gasket # 2C0-11181-01 off ebay all in factory packaging supposed to be for an 06 up R6, Today I am surfing ebay again and find one 5SL-11181-00-00 for an 03-09 R6. before I ordered I went on two parts suppliers sites and...

thx ill try it

how do I post them? I am going to be tearing my bike down tomorrow to change head gasket, radiator, thermostat, coolant, oil, filter ect....

now that is funny

sorry no i dont just going from info from I Jets thread on R6 cams head gasket and headers

Yes just have to make sure all timing is spot on.

Never mind I found the similar threads answering my dumb question.

Can I use an 06 R6 head gasket on an 06 FZ6? I understand the r6 gasket is thinner would I have a spacer to make it work?

Thank you:rockon:

I am going to be replacing my fork seals but don't have a digital caliper to measure them with so I can buy the correct seal driver. Does anyone know the outside diameter of the fork tubes? Shop here wants 220 to do it and I can buy the driver and OEM seals for under 100. Bike is 06 FZ6 (blue W/...

I saw the turn signal help thread but didnt want to hijack it with mine as my problem is kinda the same but different. The turn signals on the right side work both front and back but the left side nothing front and back but the front left one lights up when I start the bike. running lights work...

12 volt pool light led strips work great bit expensive but really bright to oncoming cagers

12 volt pool light led strips work great bit

do you have to do inspection in your state by that I mean they physically inspect the bike? If you do as soon as they see a weld/braze on the frame you are going to be salvage titled unless just for show you do the exact same on opposite side.

I personally don't have an issue with it for two reasons/rules. One I don't ride harley's I ride metric bikes, Two if you are facing tariffs it simply means your stuff ain't Made In The USA. I remember when Harley was but not so anymore. I lost a lot of respect for harley for it. Because of this...

my new issue is when I crank the throttle it bogs for a second then begins to wind up when this happens it sounds like its sucking air then it takes off. im not sure how to post a video of it but ill try then when at WOT if i totally let off the gas it will wind down and die this is not good and...

take your seat off and about where the passengers ass would be where the frame rolls down towards the riders ass position there is a support bar flat about 1-1/2 wide that connects both frame rails on that flat piece is a little sticker about 1 inch long 1/2 inch wide or so mine is white it has...

sorry guys been insanely busy with work and life yes I have update, what final said made perfect sense and I was not getting any steam vapor coming out over flow bottle or any moisture from the two drain hoses so went with a new sensor and now she runs cool Im thinking the wreck the PO had may...