Recent content by Skylardog123

The clutch is fixed now, im still not skilled enough to do wheelies, but the clutch cable wasnt adjusted right, someone grinded the adjuster screw in half so i thought i gad adjusted it all the way, ordered a nee one and works fine now

Im a new owner of an 04 fz6, it has 42k miles on it and runs really great, it had a few minor issues, (needed new clutch, adjusted CO1 and CO2 to make it run richer bc it ran lean,) i might sync the throttle bodies when i get the money, but what kind of maintenance should i do at 42k miles, the...

Ill do all those things in the AM , also, when i got home, it was in neutral and at idle sitting still, snd i heard a faint rattling/ small knocking noise coming from the engine itself, it has 42k miles on it and the valves were adjusted 10k miles ago, could they need to be adjusted againa

I thought you could check the fuel air ratio from the diag menu. And not sure how to sync throttle bodies?

Oil is new, and i dont think it could be from the wheels as it doesnt do it when rolling with clutch in unless im giving it throttle, clutch or unclutched it only does it when i give it throttle

Hi, i am a new owner of an 04 fz6, it has 42k miles on it with a yoshimure exhaust, it runs amazing, has all the power i think it should But there is only one issue with the bike i cant figure out, when accelerating, or revving the engine, i hear a ticking noise from the front end, noticed it...

Hey , so new fz6 owner here, its an 04, i bought it with anaftermarket yoshimura eexhaust on it, and it has a ton of power, but i feel like it should have a bit more or at least idle smoother, not that its bad, but my main concern is thay it pops alot on decel, no matter what when im not on the...

1. It was jerking when i held it in so i replaced the plates, the 1st and back plate were worn pretty good, 2. Not yet, would it even be visible since its insulated by the black cable 3.whatever my dad bought for it, he said he bought the oil that the bike uses, 4.its an 04, and i did the...

Maybe, ill check this weekend, any chance it could be frayed somewhere but still works just not enough to make a huge difference? Bc ive noticed my clutch doesnt grab untill the VERY VERY end of the lever depress

Thats the thing, dumping the clutch would have been my first thought. but when i dump it, the bike doesnt just dump it, it lets it out with ease and slowly, no matter how hard i dump the clutch, almost as a safety feature lmao

Yeah i soaked them, maybe its just my bike, it just doesnt feel like it has the power to do a wheelie, i mean i have the power, but doesnt feel like it has enough torque, i try to power wheelie in 1st or 2nd and all it does is jerk me back, it wont get the wheel of the ground for anything, any...

I also forgot to mention my clutch is brand new, not the cable, but the ckitch plates have been in for only like 3 days, also when i try to dump the clutch to bring the front tire off the ground at high rpms, it doesnt act like im dumping it, it acts like its still letting out slowly even if i...

Okay so, idk if its just my driving or what, but when im in 3rd gear, and i go to switch to 4th, when i pull the clutch in and shift up real fast all while holding the throttle, when i shift to 4th, the rpms stay the same as if i was still in 3rd, then gradually go back down as if i upshifted as...

Okay so i want to upgrade to leds, but also want to do the headlight mod to have 2 low beamd and 2 high beams, anyways, if i order 2 h4 bulbs, one for each side, that are both dual beam bulbs (which means kt has a higj and low beam in one bulb), if i do the headlight mod, then if i have the...

Hi sooo, anyways, im new here, i bought an 04 fz6, anyways the 2 bolts that hold the from of the gas tank down, are 10mm size bolt heads, i know that much, well, one of them is missing, can anyone give me a part number for that one And the other bolt i need, is the one that goes on the...