Recent content by shadowmansm

I purchased a new fuel pump from eBay @ $35 shipped. :thumbup: The part was a 08 Yamaha R6r fuel pump. The pump had a broken output nozzle but since this is a DIRECT replacement, I was able to use the output cover/nozzle from my old pump. Snapped my old fuel float on the side (R6r has a...

How/where to get fuel pressure regulator cleaned? Can one be purchased (part number please)?

Thanks for all the detail and advice FinalImpact! I will perform the tasks as outlined and reply back with the results. I will def. be doing this before messing with the injectors as that is expensive!

Ok, I was confusing the sensor with the valve. I do not believe that to be the problem as I get nice flow to the injectors. Thanks Db52280

Not roll over sensor. Bike will not turn over at all if disconnected. What valve by the tank are you referring to, the overflow.. which is good btw, checked. Thanks Db52280.

Yes, the fuel pump can be heard.. and I have cleaned everything up till the fuel injectors. The inside of the tank looks clean, no rust or grime. I even completely emptied it to make sure fuel/water was not the issue. I looked over the fuel filter and it seemed to be quite clean. Furthermore, I...

...thanks trepetti, that is what I am thinking as well. So, essentially, it probably is the (clogged?) fuel injectors because the lines are clear all the way to the injectors (I checked the fuel rail). Would it be advisable to buy new injectors or get these professionally cleaned? Or even...

Hello everyone! My first post here, though I have been visiting the forum for some time now. I bought a used fz6 a couple months ago and it ran well (for the most part) up until a couple days ago. I was coming around a low speed turn near my house when an animal ran out in the road, I had to...