Recent content by Premik91

Thank you for your help and advice. The bike is in everyday use and i will tackle the diagnose and repair of the cluster/LED when i have replacement...

Hello It took me a little longer to test the light, but after grounding it, it still does not light up. So i guess there is a definite problem with the light, that is the cluster, itself. Good luck finding a replacement with ABS. I looked everywhere, but not a single one with ABS. If somebody...

Hello I have performed the tests regarding the light green wire in the cluster "feed" plug. I have 6 and 7 wires on those plugs... I do not have the voltage on the light green wire when i put it in gear. So i guess there is a problem in the connection itself. The cluster backing plate is damaged...

I have a multimeter. Will go trough the connectors, but i think there is not a problem there, it is a very clean bike, looked after. But i have seen, upon inspection the cluster backing cover - there was some welding to the plastic, and some silicone. It looks scary, but i think this is a good...

Thank you, I will have a look and report back. If the bike is in neutral, then it does start with the clutch disengaged. If the bike is in gear, and i drop the side stand, the motor cuts out. Is there any way of first checking if the LED itself works without opening the cluster and circuit in it ?

Hello First of all please excuse me, for asking questions right away, but i really need your help - maybe someone has some similar experience. The bike is a 2007 Yamaha FZ6 S2, naked, with ABS. It has heated Oxford grips which i have not fitted - i do not know if it plays any role in this...