Recent content by Jorsher

Hi guys, Just an update. I managed to get another mechanic to look at the bike, he took some of the casing off to examine the extent of the damage (see additional photos). A chunk of the engine block came off. The mechanic informed me that it can be welded back on, however a complete...

I believe it snapped due to poor maintenance on my behalf, not sure what exactly snapped, I was unable to recover chain as it happened on the motorway. It happened at the end of a 100 mile journey in which I was travelling at consistently HIGH speeds. The high speeds undoubtedly contributed to...

Thanks for the advice so far. If I were to completely remove and strip down engine would it not be possible to have damaged parts TIG welded together. Another more costly option would be to buy a second hand engine (£600) and fit myself

Hi, I was riding along at 80mph and my chain snapped and smashed into the sprocket cover. Oil immediately started pouring out. I pulled over and turned the engine off. There was a large crack across the sprocket cover, that crack followed onto part of the engine assemble, see photo (left side...

Hey guys, Sorry for the late response. I by luck managed to find a supplier in the UK that sells exactly the same kit (Hids direct). I talked the supplier into selling me one H7 and one H4 projector. He now has an odd H7 and H4 projector that he probably wants to sell. I have already passed...

Hi, I am thinking of going for either blue or red rings. Blue is ok with me. I think the seller only does 6000K rated, Alot of people on this forum think 6K are better than 8K due to an increase in light output. I currently already have Xenon (without projector) bought from a company in...

I am looking to install the same set of angel eyes projectors from the following ebay seller...

Hi I am looking to install a set of angel eyes projector kit from the following ebay seller. PROJECTOR LEN KIT Angel Eye E46 M3 TSX H4 D2S HID XENON on eBay, also Bulbs Lenses, Lights Lighting Accessories, Car Tuning Styling, Cars, Parts Vehicles (end time 05-Jul-09 04:38:19 BST) Some...

Hi, I saw your post on the HID install. I purchased a 35W xenon kit from HIDS4U with a H7 and H4 bulb rated at 6000k. I am having a problem with the light emitted from the bulbs (see my post http://www.fz6-forum.com/forum/fz6-mods/14871-headlight-fault-after-modification-hid.html) What do...

Thanks for the responses so far. In regards to the wiring, I did not modify anything. The previous owner made a modification that allowed both the headlights to come on during the use of low beam (I will check the method used for wiring). I just recently checked the current/voltage on each side...

Thanks for the quick response. I also initially thought that the different reflectors gave the impression that the H4 bulb was dimmer. I have attached a pick of the original halogen configuration (H4 on the left) on low beam However after installing the new Xenin kit I took out the xenon...

Hi, I have a fazer s2 2007. The bikes previous owner must have already made a modification so that the H7 and H4 bulb came on when low beam was switched on. When high beam was selected the H4 beams second filament would come on. I later noticed that the H4 bulb was always a little bit dimmer...