Recent content by Gelvatron

cluctch side foot peg (how much)

Thanks man you are the best.

I have been away from this lovely community for sometime, but I have to say it feels good to be back. The motivation for me to turn on the computer is the bike. Yes this means it was turned the wrong way. Apparently the wheels have to always stay in contact with the road. Crazy who would design...

already pm'd you about the xhaust. :). also wanted to know about the handlebar clamp. Clutch foot peg (assuming the rubbing comes with it).

Nailed it, calipers are mounted in A fixed location so that the rotor can rotate and pass through it they are just a housing for the brake system components. I would recommend not using a spacer and buying a torque wrench. Best of luck

I have a used seat, from an 07fz6 had 7000 miles on it when I replaced it if you are interested let me know I live in mission viejo

100% agreed

I have the moto dynamic taillight as for cutting the resister pack I don't know but I did keep it with a new relay for LEDs and it does work and look great

Not necessary As for feeler gauge measuring if you have never measured with a feeler Gaige before work with a friend that knows how, or watch some you tube videos slight drag is what to look for

The aspect of my comment was safety not price, Hence the last sentence if cannot afford do what others suggest if you are not doing the safe thing because you are frugal you have played your cards then :) either way so what you feel is best

This post is getting to serious I hope it all works out for you a lot of these gentlemen know a lot about this just try to keep it simple and don't install any vibrations On a second not if the smoke comes out the computer that's bad too

The goop inside the tires is a temperature thing to get to a shop it causes a wheel imbalance and can cause wheel tramp temporary only, Plugs are also in this category, An inner patch with proper seal cleaning and cement is re only proper way to repair a puncture , I tell you this from...

Hey man I have an 07 with painted lower too I so happen to live in OC also did you have any fitment issues with the PB lowers? The front of mine were really lose I wanted to know if I could check yours out

Just have to say I bought an electrical part from skooter great photos and info was passed to me. I would recommend any purchases from him ;) g/l with sale happy new year

Real time gps I don't know how hard it would be to ride and look at the glass screen maybe that's a terrible Idea