Recent content by dev_usc

sorry for not responding... best way to reach me is email vds002 at yahoo.com or txt/call 423-3eight3-4914

Can you please share some pictures of how well the speedometer plate from Laean fits the VS02 kit... this will help us out a lot...

sorry use of wrong word. I meant "Add/Reduce" thanks for correcting

you have two options 1 - Add/Remove resistors in series with LED signals 2 - Swap the stock flasher relay with Electronic Flasher relay Option 2 is the BEST ELFR-1 Electronic LED Flasher Relay with OEM Connector | Custom LED

feel free to email/txt/call me and I would be glad to walk you through the process. -Vishnu

http://www.600riders.com/forum/fz6-streetfighter/50700-vs02-wind-protection.html

if someone can give me the CAD file I can see if my boss will let me run a few batches on the CNC

can you post some high and low beam output in dark...

you mentioned it was laid down... does it have clean title or salvage title... this will make a difference in the final value....

looks great.... can you share the model number and where you purchased the hid projector...

A washer or two never hurts :Flash:.. As long as the bolts are tightly screwed everything should be fine. Also please dont forget to zip tie the top part of bracket to the ignition lock.

would you mind sharing the ebay link. I have been burned twice...i think i had something they call G3 and then G5.... the projects were POS as the light cuttoff was horrible and scattered all over.. also the intensity was bad..

Arien.. hope you were able to figure everything out... if you need any help please feel free to call my cellphone and I will do everything to help...

Bump to the top...:cheer:... exhaust only $15 + shipping

I dont think it has E-Mark on the headlight lens but I think it has on the H4 Bulb... I have shipped quite a few to SPAIN, UK, ITALY and NORWAY. I will check with those guys to see if they ran into any problems...