Recent content by cenoxodus7

I currently have a scorpion exaust on my bike, but for some occasions its just too loud. I want to be able to switch between exhausts for different occasions. If anyone has a Stock exaust for the fz6 I would like to buy it. I dont need the midpipe, but if you are only selling them toghether that...

I Recieved my VS02 kit from dev_usc last wednesday and had it all installed in about 6 hours total. I love how my bike looks after I did the conversion, if anybody is trying to decide whether or not to convert, DO IT. I think the bike looks better and even though its probobly just me I think it...

Yes, The bolt itself was bent, but only to where it meets the frame. The threads on the engine were perfectly ok and there was no other damage to the frame around the area. My frame was still straight as a arrow:)

I just recently low-sided my FZ at about 40MPH, here is the damage. Notice the left frame slider compared to the right, Even after sliding about 80 yards The slider only ground off about .125 inch. I was able to get up and ride away, I have a feeling that without these I wouldn't of...

I am having troubles figuring out which headlight to buy to convert my 2006 FZ6S to a FZ6N. I have Read a bunch of threads about the conversion and have come up with confusion. I lowsided my bike and the front fairing is ruined, ive always wanted to convert but never looked into it. Now that i...

Thanks for the quick response. I checked the spacers and they are all acounted for. I also checked the slot was placed correctly on the locator tab. I got anxious to ride since the cold weather is coming so I modified my original bracket to work. I just took a flat file to the slot the disc...

Hey guys, I recently got a new tire and upon installation of the rear wheel I noticed the brake disc was rubbing on the caliper bracket. My first thought was that my disc was warped so i checked the disc and its straight as an arrow. I figured the only other thing that could be wrong was the...