Recent content by BBOutlaw

For me, it was the starter motor. After replacing it, everything is fine. :)

Dear Motogiro, The bike was in service and they cannot fix the problem, but told me, it's the ECU. I checked at home the ECU connector, it looks fine, but I started the engine, wait for 2 cylinders stop and I push hard with both hands the connector to ECU on the side where the orange-black wire...

Is the ECM connector what connected to ECU? Yeah, I swap the coil, in that case it was Error 33 too. Tapatalk-kal küldve az én ZTE V967S-el

It's so interesting! When it just thinks, the two cylinder stop working. Yesterday I had to go around 50km and the whole way just 2 worked. On the way back it was normal, all 4 worked properly, there were only moments for engine light on and the 2 stop working. How could it be sometimes work and...

Dear FZ6 Mates, I have a problem Yamaha RJ07 FZ6N 2005, some of You may have before. It's the error code 33, cylinder #1 and #4 stop working. When I start it in cold, everything is okay for 2 minutes, then engine light on, cylinders stop working. I tried to push ECU while the problem shows...