Recent content by adyrip1

  1. A

    Front ABS, not working?

    If you decide to take it apart, I am curious in what you find and if you can fix it. I know you can fit non-ABS part, my fear was getting stuck brakes while riding, that's why I am holding back on taking it off and opening it.
  2. A

    Front ABS, not working?

    Did some reading about it, as I was considering the same, taking it apart. It's two solenoids and a couple of electromechanical valves. Most people online think it has to do with not changing the brake fluid regularly (mine sat a while before I bought it) so it is very likely, in my mind, it is...
  3. A

    Front ABS, not working?

    It's a known issue, I have it as well. The ABS pumps are so fragile, they stop working at the slightest breeze. There are companies that refurbish them (google them), while a new one is around 2000 euros.... I opted to ride it like it is since it's more than half of what I paid on the bike to...
  4. A

    2006 Fz6 Fazer Immobilizer issues

    Checked the wiring, on a visual inspection nothing seems off or loose, no exposed wiring. Pretty sure the CEL did not come on, I would have noticed it while trying to start it. All the lights on the dash behaved normally, only the immob light would flash every second or so. The good part is it...
  5. A

    2006 Fz6 Fazer Immobilizer issues

    Yes, the starter engaged, the engine would turn but not start. Wierd thing is it only did it on Saturday. Had multiple start/stops since then and no issue. I have cleared the codes, if it does it again and throws the 12 code I will change the CPS. So the immob light comes on when the ECU...
  6. A

    2006 Fz6 Fazer Immobilizer issues

    Bought the bike in April and worked flawlessly since then. Yesterday when leaving home, it would turn over and not start, realised the immobiliser light was flashing on the dash. Fiddled with the key on/off and started. Thought it's just a gremlin. The same for the next start, except it took...
  7. A

    Wind protection advice

    Final update, extremely happy with the purchase. Found the sweet spot, considerably less noise and turbulence and a lot less bugs.
  8. A

    Wind protection advice

    Here you are :) I know some will hate, but I actually like the way it looks and enjoy riding it more without all the noise and bugs
  9. A

    Wind protection advice

    The screen arrived yesterday, quick install and instant improvement. I only tested 2 positions so far, both at max height, one with the same angle as the stock winshield and the other one with the MRA screen vertical. In the first position not a major difference, but with the vertical one it's...
  10. A

    Wind protection advice

    I went through a lot of reviews and finally pulled the trigger on the MRA Tour. It was the biggest one I found, it adds 15cms, more than pretty much every cheap one I found and more than the Givi touring. I will report back with results.
  11. A

    Installed crash pads

    Just installed a pair of Ebay crash pads. They are made from aluminium, look pretty good quality and are labeled FZ6 for an extra 1hp ;)
  12. A

    Help needed - bearing sound?

    Will check, thanks for the advice!
  13. A

    Help needed - bearing sound?

    Final update, got it from the shop, the sound is gone. They have no clue what might have caused it, did not find anything visibly off, probably slight misalignment by the guy that put it back together after the tire replacement.
  14. A

    Wind protection advice

    2006 FZ6 Fazer with the stock windshield. Took a long ride on the highway and I had to pull over several times to clean the dead insects from the visor. In the normal riding position (I am 180cm tall - 5.9 feet), the wind is coming straight into my chest. And leaning over the tank is not really...
  15. A

    Help needed - bearing sound?

    Status update, it looks like the brake disc is touching on the caliper. It's in the shop now, it's possible that when I had the tires replaced, they did not install correctly the wheel spacers.
Top