WTB: Rear wheel and Rear Signal

[jrevans]

Thanks for your help

Thanks for your help folks. Granda080 hooked me up with some rear signals :thumbup::thumbup::thumbup: and I just purchased another rear wheel last weekend. Now to find time to get my bike back on the road!

 

[granda080]

Do you need the left or the right signal?

 

[jrevans]

Do you need the left or the right signal?

I was under the impression that both rear signals were the same. But, with that said, I'm looking for the left signal (as seen from standing behind the bike).

 

[granda080]

I'm not sure, I didn't look closely at them. I have a set I'm not using but the left has a few scuffs. If you PM me your email address I'll take a picture of them. If you want them or it, it's yours.

 

[TownsendsFJR1300]

I was under the impression that both rear signals were the same. But, with that said, I'm looking for the left signal (as seen from standing behind the bike).

No, they are different.

Just the lens removal screws are located at the bottom of the unit..

 

[jrevans]

No, they are different.

Just the lens removal screws are located at the bottom of the unit..

Heck, I didn't know that guys!

I guess I should have checked the Yamaha parts drawing before posting. Thanks for the information.

 

[TownsendsFJR1300]

No problem! :thumbup:

 

[vkprashanth1]

hi, i have both the rear turn signals in good conditions. $40/- shipped.

let me know if you are interested.

 

[greg]

the cable might be slightly different colours and length, but other than that they should be identical.

I took one off an R1, but I did have to solder the wire to make it a bit longer. All yamaha indicators should be very similar (for a similar age bike).