Random vacuum line, where does it go?

[TofuJunky87]

So I was working on the bike tonight and I was getting the fuel lines ready to reattach to the pump because I had the tank off. I looked down and next to the frame there was a random vacuum line that was disconnected. I didn't disconnect this line with the tank and I have no idea what it plugs to because I can't seem to find its mate. It does appear to have a connector of some sort on the end. Here are some pics. Does anybody have an idea??

 

[FinalImpact]

If you look close there should be 4 of them. Two on each side. The pinks bands are the outers to cyl 1 and 4 for Throttle body sync.

Just an access port for a gauge. Leave them plugged. :thumbup:

 

[Motogiro]

If you look close there should be 4 of them. Two on each side. The pinks bands are the outers to cyl 1 and 4 for Throttle body sync.

Just an access port for a gauge. Leave them plugged. :thumbup:

[MENTION=15974]FinalImpact[/MENTION]

Is that on of those lines that has a rubber plug/cap on the end? And it's missing the rubber cap? Or is that line suppose to go somewhere?

 

[FinalImpact]

[MENTION=15974]FinalImpact[/MENTION]

Is that on of those lines that has a rubber plug/cap on the end? And it's missing the rubber cap? Or is that line suppose to go somewhere?

Solid Core bro!

It's all inside!

 

[TownsendsFJR1300]

Those plastic connectors are solid and actually plug each of those sync lines (normal).

You'd pull the caps when hooking up your sync tool.

 

[TofuJunky87]

Awesome. I won't worry about it. Thanks everybody!