prozach1000
Junior Member
Just picked up a Motodynamics integrated tail light, with stock rear signals for the time being. Problem is when connected to the corresponding left and right rear turn signals, the tail light blinks on the left side even with the indicators turned off.
I have searched for a solution but seem to only find the solution of making sure the wires are wired correctly. But even when i switch the left and right wires the tail light begins to blink on the right side.
I have also installed a relay, as i intend to install led headlights and flushmounts. Any ideas would be much appreciated. I am mechanically inclined but, am an ape in regards to electrical...already blew a fuse.
Pics for illustration:
I have searched for a solution but seem to only find the solution of making sure the wires are wired correctly. But even when i switch the left and right wires the tail light begins to blink on the right side.
I have also installed a relay, as i intend to install led headlights and flushmounts. Any ideas would be much appreciated. I am mechanically inclined but, am an ape in regards to electrical...already blew a fuse.
Pics for illustration:
Last edited: