Tailgate
Senior Member
You get it back together OK?
Interesting job. Reminds me of when, 1970's, I rebuilt my Ford Pinto's front calipers. So far, I discovered sediment/crud on the bottom of fluid reservoir, and in bottom of piston cylinder. Some burnishing on piston surface. I wish I had pre-ordered pads, probably throw back on old ones for now. Polished up piston, cleaned up with Brakleen caliper parts (protected any rubber on caliper), and tomorrow will reassemble (have new seals) and lubricate with brake fluid. I guess I'll lightly apply some brake grease to pivot points. Will update upon final assembly. Hoping that this op will cure my pad dragging. I say, "likely" since it's first service in about 40K miles.