srichterSS
Junior Member
I've been working on getting a good set of HID projectors. I just got this kit Bi-xenon Morimoto Mini Stage III Kit (H1) - Complete Retrofit Kits from The Retrofit Source Inc
It came with a relay harness that only supported low beams but the housings have the solenoid flap so I figure itd just be as easy to use the high beam wire to power the flaps.
However as Ive been rigging it up I noticed that my low beam supplies power and the high beam is grounded or whatever. I even plugged in the old H4 bulb and the high beam turns it off while it stays on in lowbeam. I want the high beam to have the power to activate the solenoid.
Its always worked before, so I must be missing something. This is my first post so if you know anything your help would be great.
It came with a relay harness that only supported low beams but the housings have the solenoid flap so I figure itd just be as easy to use the high beam wire to power the flaps.
However as Ive been rigging it up I noticed that my low beam supplies power and the high beam is grounded or whatever. I even plugged in the old H4 bulb and the high beam turns it off while it stays on in lowbeam. I want the high beam to have the power to activate the solenoid.
Its always worked before, so I must be missing something. This is my first post so if you know anything your help would be great.