Dennis in NH
Member
Hopefully these prices are quite reasonable; please feel free to let me know if I'm out of line.
I'm trading my bike so I put it to mostly stock last night; I'm pretty anal about things so these items are in good shape; nothing fell or crashed so they should look good mounted on your bike (at least as well as they looked on mine). I can post photos later (feel free to PM or post to ask questions).
All is sold -- thanks everyone. No more FZ6 left.
Rear wheel complete with rotor and sprocket (from my 2008 FZ6) ready to mount (except tire). This wheel is in good shape (I was going to use this wheel for the track so it's in great shape with no bends, issues of any sort; the wheel is clean). Soon, I'll post pics of wheel with no tire.
Rear wheel $240 plus shipping (pictured below except tire has been removed).
All sold:
Rear wheel (SOLD)
Hyper Pro fork springs (these have maybe 1000 miles on them) $100 plus shipping (SOLD)
The Hyper Pro springs are progressive and really firm up the front for much improved handling over stock (they improve even everyday casual riding). If you just install springs, it's easy -- move handlebars out of the way, jack up the front, loosen the fork caps, let the bike down and pull out spacer, washer, and OEM spring; then insert Hyper Pro springs, washer, spacer, jack the bike up, tighten fork caps, test, done. Jacking up the bike, lets the springs go down into the tube (to facilitate removal of fork caps); letting the bike down lets the springs come through the top of the fork (to facilitate easy removal of springs). If you want, you can also change to 15wt fork oil for improved compression and rebound.
Rearset setback plates plus required hardware (extra new shift rod if you want) $70 plus shipping SOLD
Yamaha OEM underbelly pan with mounting bracket (Yamaha's dark blue color) $180 + shipping SOLD
Top Saddlery seat (no gel) $250 + shipping (SOLD)
Scorpion slipon mufflers (only used 6 months) $300 + shipping (SOLD)
FZ1 handlebar (pre-drilled for easy installation) $25 plus shipping (SOLD)
The Yamaha underbelly pan came with the bike and is in good shape. There is some normal wear due to being near the front tire; still looks very good.
The Top Saddlery seat is in good shape (not sure how that kind of seat would really wear). Note that this seat cannot be shipped until I get my replacement OEM seat in the mail (maybe 1 week).
The Scorpions have maybe a few small scratches where the mufflers meet the mounting area under the seat. These scratches are completely hidden (and probably occurred during installation).
The FZ1 bar allows a lower and more aggressive riding position.
Setback plate on clutch side:
Scorpions mounted:
Underbelly pan mounted:
Dennis
I'm trading my bike so I put it to mostly stock last night; I'm pretty anal about things so these items are in good shape; nothing fell or crashed so they should look good mounted on your bike (at least as well as they looked on mine). I can post photos later (feel free to PM or post to ask questions).
All is sold -- thanks everyone. No more FZ6 left.
Rear wheel complete with rotor and sprocket (from my 2008 FZ6) ready to mount (except tire). This wheel is in good shape (I was going to use this wheel for the track so it's in great shape with no bends, issues of any sort; the wheel is clean). Soon, I'll post pics of wheel with no tire.
Rear wheel $240 plus shipping (pictured below except tire has been removed).
All sold:
Rear wheel (SOLD)
Hyper Pro fork springs (these have maybe 1000 miles on them) $100 plus shipping (SOLD)
The Hyper Pro springs are progressive and really firm up the front for much improved handling over stock (they improve even everyday casual riding). If you just install springs, it's easy -- move handlebars out of the way, jack up the front, loosen the fork caps, let the bike down and pull out spacer, washer, and OEM spring; then insert Hyper Pro springs, washer, spacer, jack the bike up, tighten fork caps, test, done. Jacking up the bike, lets the springs go down into the tube (to facilitate removal of fork caps); letting the bike down lets the springs come through the top of the fork (to facilitate easy removal of springs). If you want, you can also change to 15wt fork oil for improved compression and rebound.
Rearset setback plates plus required hardware (extra new shift rod if you want) $70 plus shipping SOLD
Yamaha OEM underbelly pan with mounting bracket (Yamaha's dark blue color) $180 + shipping SOLD
Top Saddlery seat (no gel) $250 + shipping (SOLD)
Scorpion slipon mufflers (only used 6 months) $300 + shipping (SOLD)
FZ1 handlebar (pre-drilled for easy installation) $25 plus shipping (SOLD)
The Yamaha underbelly pan came with the bike and is in good shape. There is some normal wear due to being near the front tire; still looks very good.
The Top Saddlery seat is in good shape (not sure how that kind of seat would really wear). Note that this seat cannot be shipped until I get my replacement OEM seat in the mail (maybe 1 week).
The Scorpions have maybe a few small scratches where the mufflers meet the mounting area under the seat. These scratches are completely hidden (and probably occurred during installation).
The FZ1 bar allows a lower and more aggressive riding position.
Setback plate on clutch side:
Scorpions mounted:
Underbelly pan mounted:
Dennis
Last edited:
What bike are you getting? 
