Gribbleman
New Member
Hey all - I just picked up a super nice (looking) FZ600 but it needs some tuning help. The guy before me put a Dynojet kit in it and I am guessing he got it wrong and it needs a little help. It has pods but a stock header and slip on Yoshi.
It is currently located in Las Vegas Nevada so maybe a couple thousand feet of elevation.
Any carb experts out there that can suggest a starting point with the jetting? It barfs, pops, backfires on idle. The RPM's will run up a little then back down even with choke off and warm.
Thanks for any assist.
Tom
It is currently located in Las Vegas Nevada so maybe a couple thousand feet of elevation.
Any carb experts out there that can suggest a starting point with the jetting? It barfs, pops, backfires on idle. The RPM's will run up a little then back down even with choke off and warm.
Thanks for any assist.
Tom