mount

Hey all, Just attempting to cost and source parts to convert my FZ6 S2 to naked. Really struggling to find any pre-made mounting solutions that will ship to the UK. I thought ebay would have a few solutions but unless I'm searching for the wrong thing....nothing. A lot of people appear to...

SOLD This headlight is from a Yamaha FZ15 (sold in India). It looks like the VS02 kit. I fabricated a speedo mount out of a plastic cutting board, which held up well for the few months I had the headlight on before switching to another setup. I can throw in the fabricated speedo mount. Note...

Available immediately. Still brand new and never mounted. I just decided I'll probably never actually put side cases on this bike. Model # PL351. Comes with hardware to mount to a bike with the topcase arms in place. $115 shipped to lower 48.

The mount is for Garmin Street Pilot c310 Street Pilot c320 Street Pilot c330 and Street Pilot c340. I don't have it anymore so not using this stuff. The U-bolt base will go .5-1.25 in diameter. The arm is almost 4" total length and 3" from socket to socket. I know most cannot use the Garmin...

I have a iPhone 6. I'd like the ability to have it in view for map use but I'm not sure I want something permanent bulky and ugly. Sleek and removable would be best but it has to be reliable, i don't want to see my phone drop and skid along the road because the mount was crap. :) Any...

Has anyone attempted to install a helmet lock? My old ZR-7 was factory fitted with one in the same location as the lock to remove the seat on my FZ6. The ZR-7 lock was positioned perfectly for the pillion foot peg to support the weight of the helmet and the "D" shaped ring on the strap went...

The the build thread for what it looks like now: http://www.600riders.com/forum/fz6-streetfighter/56744-journey-so-far-lessons-learned.html I swapped my headers for some R6 headers, and I'm more than happy with the results. What I'm worried about at the moment though is that the exhaust is...

Can you please post pics of how you mounted your iPhone to your bike? Thanks in advance! JP

I bought some swing arm bobbins for my paddock stand and discovered there isn't any mounting boss on the swing arm. I've noticed some pics of FZ6's with the bobbins. I'd like to know how to mount them.

What are the sleekest ways to attach ram mount to our bikes? Just got myself a TomTom and it comes with the reservoir mount, but it makes the GPS way too high and over bearing for my tastes. I'd rather getting it closer to the speedo. Btw, I have a naked bike so that does limit my options...

So I sprang for some heated gloves this winter and I will be looking to wire everything up this off-season. I want to avoid as much trial and error (especially the error), so I'd like to hear some ideas on where to mount a power outlet on the bike that will not interfere with my riding. I...

Is there anyone who had troubles attaching the silencer rubber clamps on the delkevic 200mm. There doesn't seem to be anywhere to mount them to? the cans sit too far forward to be used in the OEM holes for the original exhaust.

So after much toying around with making a mount for the lights I finally welded one up and mounted the lights. I still have to adjust them more and when i finish that I will work on the rest of it. So far here is what I got done: This is the look right now with the wires tucked and zip tied...

For sale is a "Ram Mount" motorcycle GPS mount for the Nuvi 2300 series automotive GPS; RAM Cradle for the Garmin nuvi 2300, 2300LM, 2350, 2350LT, 2350LMT, 2360LT, 2360LMT & 2370LT (GPS NOT included) with a custom made aluminum adapter. Also included is a custom made by Powerlet, a 12 volt...

Pretty self explanatory, does anyone have any experience, good or bad, with the GoPro chest mount? How adjustable is it height wise?

So I finally got my GoPro Hero 4 silver and the side mount, but where to mount it? The side mount comes with a slightly curved sticky plate, I was thinking of mounting it just in front of the mirror on the top surface of the screen but how is that for vibrations? The advantage is I can tether...

Hi Guys I have the Givi E21 side cases, as well as the 351FZ top case mount arms for my 2007 FZ6. I'm now looking for the flat top case mount that attaches to the mount arms. This would be the flat bracket that your top case would attach to. I know there are a couple of different styles of...

I don't do many road trips but like having a GPS on the bike. Finally broke down and bought a Garmin 590LM motorcycle specific GPS for the bike; https://buy.garmin.com/en-US/US/prod145273.html I got 20% off from Garmin as I had an old SPIII that is un-supported. I was very...

Hello all! Looking for the brackets that passenger footpegs mount to! Not sure on the exact name of them, but they mount to the frame (sorta) and then the passenger pegs mount to these mounts. Anyone have a pair they are getting ride of? Please let me know!

My fiancee and I love Mountain biking.. and motorcycling (his: FZ6, hers: FZ6R). Its my dream to mount up the bicycles on my FZ6, and ride the motorcycles to the trails. But how? My 2 thoughts: 1: Get a tail rack, and mount 2 cycle trays off it like such, but then the bike is way up...