Wildcard
Junior Member
I got my bike back last night from the shop, and wound it up a bit. It definitely feels a bit better, but looking at the maps and curves...I wanna say Im not satisfied? Power and torque #'s are fine, but looking at the map and the fuel curve, doesnt seem like it was dialed in as best it could be. Let me know what you all think?
As you can see, peak power was about 93hp and peak torque was 44ft/lbs. On the run where he did 2nd - 6th gear pull, the power and speed is available much earlier on (sometimes by as much as 4hp difference compared to before) which is a great improvement. Still though, looking at the fuel chart and seeing the a/f ratios early on, Im convinced it can be better.
As you can see, peak power was about 93hp and peak torque was 44ft/lbs. On the run where he did 2nd - 6th gear pull, the power and speed is available much earlier on (sometimes by as much as 4hp difference compared to before) which is a great improvement. Still though, looking at the fuel chart and seeing the a/f ratios early on, Im convinced it can be better.
Last edited: