raja777m
Ride like you own it..!
Hello guys, hear me out.
I recently upgraded my handlebar grips to these.
Motorcycle Black 7 8" Handlebar Hand Grips for Honda Suzuki Yamaha Kawasaki | eBay
They are fat, and I like them that way.
Problem is, I have to remove the bar end weights, as you expected vibes are more.
These are not buzz like before, those are vibes.
I used to have some numbness in the wrists (I heard I'm not alone, with FZ6), now, I don't have that buzz, but those vibes moved the buzz from my wrist to my arms/triceps (left only).
Reducing handlebar vibration with lead shot. | Adventure Rider
Bike has stock plugs, 18k miles on it currently.
The front tire is 5k miles old, M-PR3 (No cuppings).
Rear is 1k miles old, M-PR4.
TPS sync hasn't been done either.
Stock exhaust (if that info is relevant).
I use Go Cruise 2 Aluminum, for throttle locker, sometimes, on long stretches.
No vibes on footrest though, clutch engaged or dis-engaged.
I heard my buddy's FZ6 have the similar problem, he has less than 8k miles as of now.
The left one is superglued, and the stock bar end weights don't go in.
1. Can I use these Rizoma bar end adapters to extend?
https://www.motovationusa.com/rizom...dIsKWRWz-OjQ6uDlYkGRLxbKqjqD2-kcNkRoCsjjw_wcB
2. Filling the handlebar with lead shots*/bar snake/play-sand with silicone sealant is a better idea?
*I heard to use two different weights of lead weights, for maximized fitting.
3. Do you have any aftermarket weights in mind, which have long screws?
I see this thread is dead or something, the UI looks different, so, I started one again.
http://www.600riders.com/forum/archive/index.php/t-32920.html
Thanks for reading and for your patience.
I recently upgraded my handlebar grips to these.
Motorcycle Black 7 8" Handlebar Hand Grips for Honda Suzuki Yamaha Kawasaki | eBay
They are fat, and I like them that way.
Problem is, I have to remove the bar end weights, as you expected vibes are more.
These are not buzz like before, those are vibes.
I used to have some numbness in the wrists (I heard I'm not alone, with FZ6), now, I don't have that buzz, but those vibes moved the buzz from my wrist to my arms/triceps (left only).
Reducing handlebar vibration with lead shot. | Adventure Rider
Bike has stock plugs, 18k miles on it currently.
The front tire is 5k miles old, M-PR3 (No cuppings).
Rear is 1k miles old, M-PR4.
TPS sync hasn't been done either.
Stock exhaust (if that info is relevant).
I use Go Cruise 2 Aluminum, for throttle locker, sometimes, on long stretches.
No vibes on footrest though, clutch engaged or dis-engaged.
I heard my buddy's FZ6 have the similar problem, he has less than 8k miles as of now.
The left one is superglued, and the stock bar end weights don't go in.
1. Can I use these Rizoma bar end adapters to extend?
https://www.motovationusa.com/rizom...dIsKWRWz-OjQ6uDlYkGRLxbKqjqD2-kcNkRoCsjjw_wcB
2. Filling the handlebar with lead shots*/bar snake/play-sand with silicone sealant is a better idea?
*I heard to use two different weights of lead weights, for maximized fitting.
3. Do you have any aftermarket weights in mind, which have long screws?
I see this thread is dead or something, the UI looks different, so, I started one again.
http://www.600riders.com/forum/archive/index.php/t-32920.html
Thanks for reading and for your patience.