Valves needing adjustment

[bpchura]

Just checked my clearances and it looks like there are a few that need some adjustment. Can anyone confirm that the size is in fact 9.48mm? I was going to order the hotcams shim pack to make it easy to get them all within spec.

For anyone wondering the clearances are below.

Thanks!

1 2 3 4

I .15 .15 .13 .15 .15 .15 .15 .15

E .25 .2 .2 .23 .2 .2 .23 .23

If I got the whole set, I would change the .2 on the exhaust and most likely bump up the .23 to .25 while I was at it.

 

[bpchura]

Sorry I guess the formatting on my little chart got weird when I posted it. You can figure out what I mean though!

 

[bpchura]

:disapprove: 7.48mm......

 

[thisisdylan]

Valve clearance (cold)
Intake valve: 0.13 - 0.20 mm (0.0051  0.0079 in)
Exhaust valve: 0.23 - 0.30 mm (0.0091  0.0118 in)

the only ones out of spec are the 0.2 exhaust ones. just buy some .05 shims for those two. the .23 exhausts are still in spec.