- Joined
- Oct 5, 2007
- Messages
- 4,886
- Reaction score
- 113
- Points
- 63
- Location
- Alkmaar Netherlands
Hi,
I don't know if anybody else thinks that FZ6-06 brakes are poor but for me they definitely are!
So I decided to upgrade them to 4 piston calipers. I have a choice from 07 S2 model and 08S2 with ABS.
The 08's (ABS) are in better condition will they fit my non ABS FZ6-06 excluding the fender brackets ?
Thank you in advance!
I'm not sure if your bike has the rotor in the wheel hub as shown here:
View attachment 30438
(BTW this is from a FZ6 manual)
or if the ABS brakes include the sensor also shown here? these are both necessary to make the ABS work correctly.
I also thought it was all run by a controller (circuit/chip) but don't quote me on that
(I remember reading an article in a magazine a while ago explaining that they use different software on different bikes, and that they don't all use the same braking pattern, so this can result in different ABS characteristics using the same brakes).
Sorry I don't know if you can directly fit the pistons from the ABS bike without attatching the rest of the ABS system
Last edited: