Last edited by a moderator:
I could not find the link on the page that Dennis has "Stuck".
anyone try to put r1 end can on an fz6?
Cans, tail?
I've bought two different R1 tails. The first is a CobraSkinz 04-06 R1 tail. It's cut to use the R1's OEM seat. Fit isn't very good. The 04-06 FZ6 subframe is much wider in most places and this mod requires cutting the OEM seat or making a new one completely. Still have this one. Next, I bought an Access Composites R1-look-for-FZ6 tail. Made similarly to typical fiberglass race plastics and requires cutting a foam pad for a seat. Never fit it. Then I sold it to ped.
hi, does anybody out there know if the clocks off a 2007 fz6n will replace the clocks off a 2005 fz6n, as they are a different shape.
LCD mounts are slightly different I believe but the fairing stay brackets they mount to can be transplanted as the frame mounting point did not change in the newer fairing stays.Are the mounts the same?
Plug is compatible according to CrazyBiker.Is the plug on the back compatible?
IIRC, you won't be able to transfer your mileage even though I always mileage should be stored in the ECU.Is there a problems with transfering milage data?
Does anyone know if R1 or R6 fairings would be compatible with the FZ6? Or how about the R1 seat fairing?
Thanks
what do you mean SBN forum? and whos ped?
SBN is sportbikes.net. There is another very active FZ6 forum there. ped is a forum member of both this site and SBN.
oso, I really appreciate the reference over to the SBN forum. I read the whole 30 pages (took me a while but i did) and I wish i could have gotten in on the original group order. Long story short I am wondering what was used to mod the FZ posted by wavex at the end. Is it even his bike?