mbdragon55
Junior Member
Hey guys. I bought a 05 FZ6 used recently and have been working on it. I've been lurking on the forum and it's been a lot of help.
So the bike came with a streetfighter conversion and two bros exhaust and the guy installed new turn signals in the front and back. The bike came with the signals not working. When I press the switch on the handle bar, nothing happens. All 4 signals don't light up and even the signal light in the speedo doesn't come on. I've changed the flasher relay to the new one from superbrightled.com as advised in another thread but still the same problem.
I saw that couple of wires were unplugged so I pulled up a wiring diagram and tried to work through it. The blue/red wire was not plugged in to the signals (see pic attached). But when I plug it in like the diagram states (blur/red wire to the green wire), the light stays constantly on and even the signal light in the speedo stays on constantly.
What else can I do? Thanks in advance for the help.
So the bike came with a streetfighter conversion and two bros exhaust and the guy installed new turn signals in the front and back. The bike came with the signals not working. When I press the switch on the handle bar, nothing happens. All 4 signals don't light up and even the signal light in the speedo doesn't come on. I've changed the flasher relay to the new one from superbrightled.com as advised in another thread but still the same problem.
I saw that couple of wires were unplugged so I pulled up a wiring diagram and tried to work through it. The blue/red wire was not plugged in to the signals (see pic attached). But when I plug it in like the diagram states (blur/red wire to the green wire), the light stays constantly on and even the signal light in the speedo stays on constantly.
What else can I do? Thanks in advance for the help.