Drew Terry
Junior Member
I went from stock bars/no risers to:
First 1" risers/1" setback, then added 1.25" risers.
Side view, I also tried to reduce the vibration with a strip of hard rubber I got from the hardware store.
I then added FZ1 bars.
With the FZ1 bars there is plenty of slack to add another inch to the risers, but it is starting to look funny.
Now that I have found the winning combination of 17T front sprocket and Vibranator bar ends to ease the vibration I may go back to the stock bars to see how they feel. I love the FZ1 bars but I also like to be as upright as possible.
First 1" risers/1" setback, then added 1.25" risers.
Side view, I also tried to reduce the vibration with a strip of hard rubber I got from the hardware store.
I then added FZ1 bars.
With the FZ1 bars there is plenty of slack to add another inch to the risers, but it is starting to look funny.
Now that I have found the winning combination of 17T front sprocket and Vibranator bar ends to ease the vibration I may go back to the stock bars to see how they feel. I love the FZ1 bars but I also like to be as upright as possible.