sparkypete
Junior Member
Firstly, this is my 1st post so hello to you all, I have been trawling the forums for a while now and find all your help and advise to be second to none, and given in a friendly and helpfull manner, unlike some other forums I have visited.
Anyway I have a 04 Fazer 600 which I am currently changing the head bearings to taper type ( aquired from Wemoto in the UK) I have re-assembled the front end and I have tightened the locking nut up enough to eliminate any slop when the forks are pulled back and forth.
However when the bike is back on the floor and I rock the bike back and forth with the front brake, I can feel a knock being transfered through to the handle bars.
Any ideas ??
Thanks
Pete:uk:
Anyway I have a 04 Fazer 600 which I am currently changing the head bearings to taper type ( aquired from Wemoto in the UK) I have re-assembled the front end and I have tightened the locking nut up enough to eliminate any slop when the forks are pulled back and forth.
However when the bike is back on the floor and I rock the bike back and forth with the front brake, I can feel a knock being transfered through to the handle bars.
Any ideas ??
Thanks
Pete:uk: