Theo Hahiho
Junior Member
Hello hello,
Two months ago I bought a second hand fz6 with a problem in the cables of the immobiliser. The fuel pump would only work if I would turn the handlebars totally to the right. So I understood that it was a cable connection problem. One day the moto decided to stop working. After asking in the official yamaha service, they told me that probably the ECU and Immo needed change, something that costs a bit less than 2000 bucks. I started messing with the moto myself to find a bit later that one of the 6 immo cables (red with green line) was broken. Happy that I found the reason of the problem but frustrated because previously I cut all 6 cables to connect them to an immo emulator. Long story short, before messing with the cables, the cluster would show everything correctly and only the fuel pump wouldn´t work. Now, after cutting the cables, I connected all of them as they were before but the cluster doesn´t show anything in the display. Only the leds work (neutral etc) apart from the immo led that is dead. And of course the fuel pump has zero functionality. Today I put a new battery as the last one dried dead. Still no luck.
Happy to listen to any ideas....
Two months ago I bought a second hand fz6 with a problem in the cables of the immobiliser. The fuel pump would only work if I would turn the handlebars totally to the right. So I understood that it was a cable connection problem. One day the moto decided to stop working. After asking in the official yamaha service, they told me that probably the ECU and Immo needed change, something that costs a bit less than 2000 bucks. I started messing with the moto myself to find a bit later that one of the 6 immo cables (red with green line) was broken. Happy that I found the reason of the problem but frustrated because previously I cut all 6 cables to connect them to an immo emulator. Long story short, before messing with the cables, the cluster would show everything correctly and only the fuel pump wouldn´t work. Now, after cutting the cables, I connected all of them as they were before but the cluster doesn´t show anything in the display. Only the leds work (neutral etc) apart from the immo led that is dead. And of course the fuel pump has zero functionality. Today I put a new battery as the last one dried dead. Still no luck.
Happy to listen to any ideas....