brady_cakes01
Junior Member
So last night I decided to Paint my forks and I noticed that I really needed to go ahead and paint the rear pegs and the silver radiator guard. Once all that was finished I noticed that I should paint the bolts that hold the farings together, so thats what I did. I really like the look, what do you guys think. Also, next to be painted will be the foot controls. I used some simi-gloss engine enamel. It seems to have worked really well, but i haven't street tested it yet. All pieces except for the rear pegs i just washed and gave about 3 coats of paint. The rear pegs I gave two coats of paint and then set my oven to 375, let it pre-heat, turned it off, then set them in there on a piece of card board and let the oven cool back down. If anyone has any questions just let me know. Also i took off the front reflectors.
Total Cost: US $6.50 (+some beer for me and my friend)
Total Cost: US $6.50 (+some beer for me and my friend)