OEM Cowling Installation

[mnuttall87]

Hey guys,

So I picked up the OEM front end off of another forum member who went naked recently. Mine never came with it so I'm going to convert it back. I have all of the pieces (I think) and I'm going to try to install it sometime this weekend.

Quick question. For the fairing stay, it looks like it mounts directly to the frame, but what size is that bolt? I'm looking at the schematic and I'm just trying to figure out what size bolt it is because I don't believe I have those.

I believe this is the part number I'm looking for: 91314-10050-00

Cowling reference: http://images.powersportsnetwork.com/fiche/images/Yamaha/2007/Motorcycles/177757_COWLING1.gif

Frame reference: http://images.powersportsnetwork.com/fiche/images/Yamaha/2007/Motorcycles/177757_FRAME.gif

Stole this picture from the "How to remove your fairing" thread to show a picture of the bolts in question.

 

[fazil]

This is for a S1. But S2 is different according to link below.

check out the link please:

http://www.600riders.com/forum/garage-mechanical-help/46507-fairing-support-bolt.html

 

[mnuttall87]

Awesome, thanks for the help. Here is to hoping that the wiring for the left side headlight is actually back there somewhere!

 

[fazil]

Did you look at the link?

On the S2 it's actually an M8x1.25 that's 40mm long.

 

[mnuttall87]

Yes, thanks for the help. I made sure I got the M8 bolts.

Sent from my SPH-L710 using Tapatalk

 

[mnuttall87]

For anyone else that sees this thread, the M8 1.25 x 40mm bolt is the correct size. Yamaha part # is 90119-08081-00 or you can find them at any of the auto parts stores in the states.

Thanks again for the help fazil!