Naked FZ6 wire harness question.

[nlheikki]

A while back I converted my bike into a naked, but I've left the wire harness completely stock. I wrapped up the harness in electrical tape behing my little windscreen to protect it from the elements. But, I was wondering if there is a better product out there to protect the wire harness if I get stuck in a rain storm. Any help would be appreciated.

Thanks,
Nick

 

[Sawblade]

Unless you want to tidy up the wiring harness by rebuilding it, the only thing you might want to do is unplug every connector and put a generous glob of dielectric grease inside each one to make sure the weather stays out very good.

 

[Wolfman]

i think the safest option, is just to tape it all up very snugly, lots of tape, then cable tie the lot up under the instrument panel as best you can....

:thumbup:

 

[nlheikki]

Thanks for the advice guys. I think I'll re-tape and tidy it up.

Thanks,
Nick

 

[antijoy]

Tidy up the front end and better protect the connectors, by moving all that excess harness length to the under tank area!