jrf
Junior Member
Ok here is the scenerio. Taking of from 1st, I get on it a little upto about 9000 rpm and shift up to second, but I don't make it to second, i'm in nuetral. Ok now what do I do? If I let the rpms drop back down to idle and shift up to 2nd while I am still going about 40 or so there is a huge clunk. Usally I let the bike slow down to about 20 or so then shift up and every thing is fine.
What do I do if this happens again:
1 slow down then shift
2 blip the throttle to about 6000 rpm then shift up to 2nd
3 thats all I can think of Please give me your suggestion or the correct thing to do.
What do I do if this happens again:
1 slow down then shift
2 blip the throttle to about 6000 rpm then shift up to 2nd
3 thats all I can think of Please give me your suggestion or the correct thing to do.