Question Main switch change wiring

[toybox]

R-Br/L is the main power supply line.
W/L to ECU.
L/B to Sidestand switch and Neutral switch and Clutch switch
Sidestand and Neutral and Clutch sensor does not consume much power when he creates a path.
So, as long as the main circuit is not connected, they draw no power and have no effect until I turn the main circuit on, right?
I want to connect them together, Let the main switch only handle the main vehicle main power supply, Current load should not be greater than 15A.
That would save me from having to consume key cogs, And there is a handsome button instead of a key!

 

[Gary in NJ]

There is no current in the safety switches, they are ground active/inactive. Push button power will be very convenient…for those looking to steal your motorcycle.

 

[TownsendsFJR1300]

You already have a push button starter somewhat tucked away with very little (to none) issues...

.

 

[toybox]

There is no current in the safety switches, they are ground active/inactive. Push button power will be very convenient…for those looking to steal your motorcycle.

While the chip effect is active, it becomes more difficult to steal it. thank you very much