oso2k
Member
I have a 5'x8' trailer connected to my Tundra 4x4 that I laid 2"x4"s across and then mounted a PowerStands PowerChock at the front. I hook two regular ratcheting straps to PowerChock front hook points, go outside the trailer, up from under the front fairing, over the top triple then underhook the top triple. I use that to keep the bike at the front of the trailer. I then hook the arms of the passenger pegs go under the side of the trailer, crossover, the hook back again the arm of the passenger peg. Unlock the ratchets and pull the strap tight to remove all slack, then start ratcheting. Compress the rear shock and front forks as much as you can. This keeps the bike form bouncing out of position.
Pics:
Pics: