Items Needed:
Allen wrench 4mm and 5mm
Phillips screwdriver
K&N air filter (YA-6004)
Time: < 15 min.
1. Using the 4mm Allen wrench remove two screws holding the side fairing. Repeat on other side.
2. Slide off the side fairing and repeat on other side.
3. Take off the Seat
4. Using 5mm Allen wrench remove the two bolts holding the gas tank.
5. Slowly lift up the gas tank, making sure not to accidently disconnect the wires underneath tank. Using bungee cords and/or string secure the gas tank to back passenger handles.
6. With a Phillips screwdriver remove six screws from the air box.
7. Lift up the top air box cover and remove old filter.
8. Making sure “FRONT” faces the front of the bike slide in the new K&N air filter in the air box.
9. Repeat steps 1 – 7 in reverse order.
10. Enjoy a cold one. Cheers!:iconbeer:
Allen wrench 4mm and 5mm
Phillips screwdriver
K&N air filter (YA-6004)
Time: < 15 min.
1. Using the 4mm Allen wrench remove two screws holding the side fairing. Repeat on other side.
2. Slide off the side fairing and repeat on other side.
3. Take off the Seat
4. Using 5mm Allen wrench remove the two bolts holding the gas tank.
5. Slowly lift up the gas tank, making sure not to accidently disconnect the wires underneath tank. Using bungee cords and/or string secure the gas tank to back passenger handles.
6. With a Phillips screwdriver remove six screws from the air box.
7. Lift up the top air box cover and remove old filter.
8. Making sure “FRONT” faces the front of the bike slide in the new K&N air filter in the air box.
9. Repeat steps 1 – 7 in reverse order.
10. Enjoy a cold one. Cheers!:iconbeer:
Last edited: