Looks I'm a year too late, but they have 2 weights now: 11.5 and 15.5, I assume I should get the later?
Thanks!
Yup, I'd go for the heavier ones.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Looks I'm a year too late, but they have 2 weights now: 11.5 and 15.5, I assume I should get the later?
Thanks!
Totally agree. With as buzzy as the FZ6 motor is, you want all the weight you can get to absorb the vibes. I love the bar ends I got last fall during the group buy. Pretty sure there are less vibes with these heavy bar ends than with the grip puppies on (which I've now removed) and heavily padded gloves.Yup, I'd go for the heavier ones.
Looks I'm a year too late, but they have 2 weights now: 11.5 and 15.5, I assume I should get the later?
Thanks!
Busy and didn't order yet, so before I do, no one has complained they weigh down steering? I'd think an extra pound on each side would have serious affects, no?
They should get fitted tonight.:thumbup:
They are a really nicely finished stainless steel, heavy , very heavy
let you know my thoughts in a day or two
i hope no one bans me for pointing out how surprisingly expensive these are for bar ends...
They might be more expensive, but they really cut down on the vibes, as for bling kazza, you could have them powder coated!
Sent from my SGH-T959 using Tapatalk
I'm going to get them powder coated too before I put them on...
i hope no one bans me for pointing out how surprisingly expensive these are for bar ends...
I noticed that you are not using the stock bar, or fz1 bar, did you make sure that out would fit your bar before ordering? The bar ends I have were made for stock bar and for the fz1 bar, not after market bars.
Sent from my SGH-T959 using Tapatalk
I must admit that I have absolutely NO Vibration problems through the bars on my bike with Bridgestone BT-023s, stock forks, bars and bar-ends. Is it common to get bad vibes on a stock setup?