Helmet(Full face) one size bigger

FZ6

Junior Member
Joined
May 16, 2009
Messages
11
Reaction score
0
Points
0
Location
Hong Kong
Visit site
I have a full face helmet. The size seems a bit too big to me.
Is there any ways to make it more fit to my head.
:D
 
There might be. Most manufactures use just as few different size helmet shells, then use different size cheek and head pads for the different sizes. Example: I bought a Medium HJC helmet, but was able to turn it in to a Small; HJC uses the same shell for small and medium sizes and use the pads to make changes.

You can ask the dealer, or contact the manufacturer; the pads are inexpensive.
 
Wear a beenie cap under it and you should be fine. Are you in China?
 
There might be. Most manufactures use just as few different size helmet shells, then use different size cheek and head pads for the different sizes. Example: I bought a Medium HJC helmet, but was able to turn it in to a Small; HJC uses the same shell for small and medium sizes and use the pads to make changes.

You can ask the dealer, or contact the manufacturer; the pads are inexpensive.


I think it is good ideas to change the cheek pads, the head pad seems ok.
thanks:thumbup:
 
Arai sells cheek pads in different thickness' don't know what brand you have.
The inner shell should have space you can also stuff thin foam wedges under to get a better fit if you don't go with a doo rag.
 
You could try looking for bigger pads, but whatever you do, absoloutely don't compromise. That helmet is the second most important piece of safety equipment you have after what is inside it.
 
Back
Top