IAMJUSTIFYD
Junior Member
Have HID and I painted the reflectors black but thinking about going to LED so would need factory reflectors. Hard to find just the reflectors
Thanks!
Thanks!
This is how it is set up which is following directions from from BKMoto. I'll try to find some good reviews on ballasts. There are so many!
If the ballast controllers are turned on by the headlamp OEM wiring the motor must be started. The halos run off a separate circuit and will turn on with just the key... Did you not start the engine?I have a question if anyone can answer it would be great. The halos are working fine, light up every time. Looking at the pictures from my previous post what could be causing the lights not to come on. I bought new ballasts, lights didn't come on. I tested with a new bulb and the new bulb didn't come on either so I don't think it's the ballasts. I put up one picture where I put some markings on it. The halo wires are connected at the wires that go to the sockets...where the # are. I don't think the ballast is getting power..? Maybe the relay?
You may have a blown headlight circuit fuse. Do you have a 12 probe type test light?Even with the key on, motor running. I think I see what you are saying. What are the plugs for anyway?
Yep, I can test the fuses, stock headlight fuse and the one with the hid relay, and they make the light come on. When I take out the headlight fuse, stock, the halos go off
Sent from my SM-G900V using Tapatalk
Isn't that the ballast supply? That burned pin is probably your problem but isn't it both lamps that are not lighting?View attachment 65852
Think it's time for a new relay & harness
Sent from my SM-G900V using Tapatalk