jackjohnsonuk
New Member
Hi all,
Bike model - 2004, mileage circa 10k
I've recently, since the winter, found my gear selector lever goes limp and requires a nudge slightly upwards to get it to "firm back up" after a change down. It moves up the gears fine, but requires either a few good stamps, or like I said a gentle nudge up, to get it to feel firm and move down. It's particularly bad going from 3->2->1.
I've already checked chain (tension) and made sure the front cog isn't too clogged up, I took off the gear selector and casing and checked nothing was binding in there and all looks ok
Any suggestions on where else to start looking?
Thanks for your help
J
Edit: added some more useful info
Bike model - 2004, mileage circa 10k
I've recently, since the winter, found my gear selector lever goes limp and requires a nudge slightly upwards to get it to "firm back up" after a change down. It moves up the gears fine, but requires either a few good stamps, or like I said a gentle nudge up, to get it to feel firm and move down. It's particularly bad going from 3->2->1.
I've already checked chain (tension) and made sure the front cog isn't too clogged up, I took off the gear selector and casing and checked nothing was binding in there and all looks ok
Any suggestions on where else to start looking?
Thanks for your help
J
Edit: added some more useful info
Last edited: