FB400
Super Member
Ok.. so I had painted my Fz6 last spring. The reason I haven't posted photos is the clear coat didn't come out well and I am not happy with the result
I plan on respraying the tank first in the fall and then the plastics over the winter
This time I very much do not want to have to empty the tank of all gas. Anyone who has done it knows it is a hassle. You cannot get all of the gas out and to get it dry you have to let it sit for weeks without the fuel pump installed and the gas fill removed to evaporate out all the gas.
I wanted this time to just run the tank as low as I can get it and leave the fuel pump in,
-.> Need I be concerned that using a DA sander would create static electricity inside the tank?
Asking please for people with experience doing this to let me know their opinion
Thanks all
I plan on respraying the tank first in the fall and then the plastics over the winter
This time I very much do not want to have to empty the tank of all gas. Anyone who has done it knows it is a hassle. You cannot get all of the gas out and to get it dry you have to let it sit for weeks without the fuel pump installed and the gas fill removed to evaporate out all the gas.
I wanted this time to just run the tank as low as I can get it and leave the fuel pump in,
-.> Need I be concerned that using a DA sander would create static electricity inside the tank?
Asking please for people with experience doing this to let me know their opinion
Thanks all