F/S: 07+ Swingarm Assembly

[skooter65]

Sold!! (07-08-2012)


Bought this during my Zx6R fork conversion as a back-up and, since I sold the bike, I no longer need.

The part is in good condition with a few cosmetic blemishes (the largest is shown in the last photo). Perfect working condition. Comes with everything needed to install on a 04-06 model.

These do not come around often so scoop it up while you can!

Parts List:

Swingarm
Part Number: 4S8-22110-00-00
Factory MSRP: $673.33

Chain Guard
Part Number: 5VX-22151-00-00
Factory MSRP: $23.77

Bushing Sleeve:
Part Number: 5EB-22184-00-00
Factory MSRP: 36.26

Bearing, Frame Mount
Part Number: 93315-42523-00
Factory MSRP: $13.51 each

Seal, Bearing Cover
Part Number: 5JJ-22128-00-00
Factory MSRP: 14.33 each

Axle
Part Number: 5SL-25381-10-00
Factory MSRP: $58.72

Chain Adjuster, LH
Part Number:5SL-25389-00-00
Factory MSRP: $18.72

Chain Adjuster, RH
Part Number: 5SL-25388-00-00
Factory MSRP: $32.57

Axle Nut:
Part Number:90185-24007-00
Factory MSRP: $18.64

Axle Washer:
Part Number: 90201-25020-00
Factory MSRP: $3.44

Total MSRP: $921.13!!!

Asking $150.o.b.o. + Shipping 9Please feel free to message me for actual shipping costs)

As always, please feel free to contact me if you have any questions.

Thank You!

Scott
[email protected]


Photos:









Picture on a Silver Frame 04' (Courtesy of jrevans)

Picture on a Black Frame 06' (Courtesy of Bakchos)

 

[PhotoAl]

A great swingarm for the 04 thru 06 bikes. Put one on my 04 and love it. Soooo much easier to adjust the chain or anytime you are putting the rear wheel back on. Only need a single wrench as the head of the axle bolt fits into the slider on the other side. My bike has the silver frame and engine (which I reallly like) but the black swingarm really fits with the black hugger and sort of disapears so the engine and frame are set off nicely. The install is very straightforward, take the old one off and put the new one on, if you have some miles on your bike it's probably time to pull the swingarm off to clean and grease the swingarm and shock bearings and bushings.

Almost forgot the swingarm is 1 pound lighter so a little more unsprung weight . . .

 

[skooter65]

A great swingarm for the 04 thru 06 bikes. Put one on my 04 and love it. Soooo much easier to adjust the chain or anytime you are putting the rear wheel back on. Only need a single wrench as the head of the axle bolt fits into the slider on the other side. My bike has the silver frame and engine (which I reallly like) but the black swingarm really fits with the black hugger and sort of disapears so the engine and frame are set off nicely. The install is very straightforward, take the old one off and put the new one on, if you have some miles on your bike it's probably time to pull the swingarm off to clean and grease the swingarm and shock bearings and bushings.

Almost forgot the swingarm is 1 pound lighter so a little more unsprung weight . . .

Thank you for the encouraging words for potential buyers (and the free bump)!

 

[FinalImpact]

I vote you sell it to Nelly!

Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum - View Profile: Nelly

 

[skooter65]

Sold!

Thank You for looking!