Broken valve stem. Is this an easy fix?

[Truthalive7]

Hey guys, I got my bike to start finally but when we were unloading it, one of the straps broke the valve stem on the rear wheel. I really don't want to buy a new tire yet for this project bike....can you just snap in a new valve stem? Is this possible?

VALVE STEM, RUBBER FOR TUBELESS MOTORCYCLE & ATV TIRES : eBay Motors (item 170394652040 end time May-12-10 12:23:35 PDT)

I was looking at this trying to see if it could be done.

 

[Motogiro]

I'm thinking you have to break the bead on the tire, pull out the old one and insert the new one from the inside of the rim . I would say the wheel with prolly have to come off.

 

[RJ2112]

I'll second Cliff..... take the tire off the rim, and insert the stem the right way.

 

[Truthalive7]

I'll second Cliff..... take the tire off the rim, and insert the stem the right way.

Anybody know what size valve stem to buy? Thanks

 

[goker]

Anybody know what size valve stem to buy? Thanks

You can probably figure it out by looking at this site based on your year of the bike. Look up the part number and do a search on it to get additional information.

PartShark.com --- Motorcycle Parts, Accessories, Apparel, & Merchandise.

 

[RJ2112]

Anybody know what size valve stem to buy? Thanks

If you plan on taking the tire off the rim yourself, I'd go to the local MC shop, and buy one from them...... I believe the stems are a standard size....

One of the things you might want to consider, is installing a stem with a 90° bend to it, so the schraeder valve points out sideways. That can make checking the pressure a lot less fiddly.

Alternate solution

 

[Falcon1220]

You can probably figure it out by looking at this site based on your year of the bike. Look up the part number and do a search on it to get additional information.

PartShark.com --- Motorcycle Parts, Accessories, Apparel, & Merchandise.

If you plan on taking the tire off the rim yourself, I'd go to the local MC shop, and buy one from them...... I believe the stems are a standard size....

One of the things you might want to consider, is installing a stem with a 90° bend to it, so the schraeder valve points out sideways. That can make checking the pressure a lot less fiddly.

Alternate solution

:cheer:

Man I love this forum. I learned two new things in these replies.
Thanks

 

[bd43]

If you plan on taking the tire off the rim yourself, I'd go to the local MC shop, and buy one from them...... I believe the stems are a standard size....

One of the things you might want to consider, is installing a stem with a 90° bend to it, so the schraeder valve points out sideways. That can make checking the pressure a lot less fiddly.

Alternate solution

This shop may no longer be shipping due to a death in their organization.

You may want to try this place...

KurveyGirl - Motorcycle Stuff: Dzus Fasteners, angled valve stems, Vesrah and More

There are two sizes, 11.3mm and the 8.3mm. According to the website, it looks like the 11.3mm is for the Yamaha bikes.

 

[jacobdahl]

If you decide to just pop the bead on one side and stuff a new valve in the hole (which is the lazy/easy way to do it) make sure any bits of the old valve are not left inside the tire, as they can damage the tire from the inside, and will also make an annoying noise. The best way to deal with it is to remove the wheel and take the whole assembly to a tire shop with a proper bead breaker. The shop I work in would not charge more than 5 bucks to do a simple job like that, and you know the tire and rim won't be damaged because we have the porper tools to do the job.

 

[08fz6]

something like that my dad usually says dont worry about paying just remember us when its time to get tires.:thumbup: