Frankgg
Junior Member
Hello everyone, I have a 2005 FZ6 I purchased used. (Sorry, put wrong year in the title)
The former owner did the following mods:
-Front Sprocket 16 --> 15 tooth
-Rear Sprocket 46 --> 48 tooth
-Scorpion Exhaust
-Power Commander III USB (Using M410-002 Scorpion Exhaust Fuel curve)
And I've noticed that it gets pretty crappy gas mileage.
(The previous owner did give me the original sprockets so I can put them back on... he didn't have the original exhaust though.)
What's the best way to up the MPG on this setup? I'm guessing I should lean out the fuel curve on the PCIII? Should I just zero out the lower RPM settings around highway cruising speed?
I'm half tempted to buy a stock exhaust on Ebay and return the bike to completely stock...
The former owner did the following mods:
-Front Sprocket 16 --> 15 tooth
-Rear Sprocket 46 --> 48 tooth
-Scorpion Exhaust
-Power Commander III USB (Using M410-002 Scorpion Exhaust Fuel curve)
And I've noticed that it gets pretty crappy gas mileage.
(The previous owner did give me the original sprockets so I can put them back on... he didn't have the original exhaust though.)
What's the best way to up the MPG on this setup? I'm guessing I should lean out the fuel curve on the PCIII? Should I just zero out the lower RPM settings around highway cruising speed?
I'm half tempted to buy a stock exhaust on Ebay and return the bike to completely stock...
Last edited: