callmegandhi
IM4TH
I have an 04 FZ6 is it possible to change out my gauge cluster for one with a analog tach? I prefer the look and the ease of reading the analog tach on the newer models. Its my only complaint on the 04's.
While I'm with you guys on the tach on the '04-06, there is an easier fix.
If you hit the top button on the right side of the speedometer a couple of times, it displays your RPMs numerically down at the bottom of the gauge. I've literally had mine set this way from day one (4 1/2 years now) and it works great. The only time it gets changed is when I fill up and I reset trip A. Then I click it back over to the RPMs and I'm good to go.
I recently changed my 06 to a newer meter. I found a used 07 with the wiring harness, cut the part that connects to the back of the meter on both the 06 and 07 harness (they are different) then paid my neighbor in beer to solder the 07 connection to the 06 wiring harness and it works
Took all and all about a day to do it. I used a lot of the info from this link, http://www.600riders.com/forum/fz6-technical/9908-multi-function-display.html
This was the main advice that helped me,
04-06 -------------- 2007
Red/White------Red/White & Red/Yellow
Yellow ----------Black/Yellow
Red/Green------Red/Green
Green-----------Green
Brown-----------Brown
White------------White
Light Green-----Light Green
Green/White----Green/White
White/Red-------NONE
Black/White------Black/White
White/Red is Ground.
Easier than I thought! Thanks for the info!