Search results

  1. Stephen ingham

    fork rebuild question

    all sorted....
  2. Stephen ingham

    fork rebuild question

    A fork rebuild question if I may gents...? I decided to change the seals on my forks and when I took them apart I noticed that the top bush on each fork is different and was wondering if I should be concerned....?
  3. Stephen ingham

    poor performance

    That's a great point, if it has done it once it is probably likely to do it again, especially as there was nothing near it to cause it to rub and chafe...
  4. Stephen ingham

    fork seal replacement help

    sent cheers stephen
  5. Stephen ingham

    fork seal replacement help

    hi guys, I noticed the other day whilst cleaning my bike that the fork dust seal seems to be perishing, although there doesnt seem to be any oil leakage, so after a little research I decided to order the main seal and the dust seal and am gunna replace them on both forks. My question is what...
  6. Stephen ingham

    poor performance

    Hi guys yesterday I noticed the bike was running a little different to normal, mainly it seemed "grumbly" so thought I would put the carb tune on and check the throttle body balance. When I attached it and started the engine up all but one of the gauges were working and balanced with one...
  7. Stephen ingham

    swinging arm bearings help

    thanks for the replies guys. I think I need to look at making something for the bike to sit on where the centre stand would be... On the note of things to remove, I only need to remove the cat don't I and not the headers?
  8. Stephen ingham

    swinging arm bearings help

    Hi guys I have a 2004 S1 FZ6N and on the recent MOT test they advised that there was some slight lateral play in the swinging arm bushes, so I figured I am going to plan on replacing the chain and sprockets soon so thought it might be a good opportunity to do the swinging arm bearings too. My...
  9. Stephen ingham

    Back wheel help

    hi guys, thanks for the replies. I probably need to clarify a little more....it appears that its the axle that is stuck not the adjusters. I loosened the axle nut right off and the adjuster nuts off a little, covered the axle nut with a block of wood and bashed it with a big hammer.....the axle...
  10. Stephen ingham

    Back wheel help

    hi guys, apologies if this seems like a daft post, but I could do with a little help and clarification if possible? today I thought I would lube my chain and once on the paddock stand noticed that the chain was a little on the slack side so I decided I would adjust it. so I undid the large...
  11. Stephen ingham

    Exhaust question

    I emailed them yesterday and this is their reply.... Dear Stephen, thank you so much for reaching to us and for your interest to our production! Yes, the side mounted exhaust system for your bike in subject is available and in this moment we offer the titanium material at the same price of...
  12. Stephen ingham

    Exhaust question

    Hi guys, I have just come across this company based in Italy who have pictures on there of an FZ6 with a side mounted exhaust.... Home - www.massmoto.com I guess my question is, is there an alternative to buying from here? Will the R6 exhaust fit the FZ6 because I understand the engine and...
  13. Stephen ingham

    Genuine/Replica FZ6 Fairing Decals?

    Hi Rich, do you have a picture of the ones you are wanting? I work for a sign making company in West Yorkshire and may be able to re-create some for you
  14. Stephen ingham

    belly pan help

    Thanks for the reply. My only real concern is that non of the sellers are UK based, and that usually worries me.
  15. Stephen ingham

    naked to faired help

    Hi, thanks for the detailed reply. I do have one of those smoked fly screens on already and just fancied if simple and cheap enough to put a bikini fairing on.
  16. Stephen ingham

    belly pan help

    Hi guys I fancy doing a bit of modding on my 2004 FZ6 and am looking for ideas or recommendations for a belly pan? Any help or suggestions would be much appreciated
  17. Stephen ingham

    naked to faired help

    that's a shame, although I am guessing by your location you are in the USA I am considering something on the line of this....Motorcycle Accessories: Dash Universal Sports Fairing Motorbike Headlight, HEADLIGHTS, HLUSF
  18. Stephen ingham

    naked to faired help

    that's a shame, although I am guessing by your location you are in the USA I am considering something on the line of this....Motorcycle Accessories: Dash Universal Sports Fairing Motorbike Headlight, HEADLIGHTS, HLUSF
  19. Stephen ingham

    naked to faired help

    hi guys, haven't been around for a while as I have had problems logging in and if I am honest my bike is running ace. However, I fancy taking my naked FZ6 and putting either a bikini fairing or full fairing on, what would this entail and where is the best place to get the bits needed? I...
  20. Stephen ingham

    FZ6 something a little different

    Hi guys, just thought i would share this find with you.... Yamaha fz6 custom | eBay Its a little different, its got a supercharger and Nos.....how mad would you have to be to ride that....?
Top